Cygnus 5 Light – Flush Fitting

Description

Technical Information

For use in zone 1, 2 and areas outside the zones

Complete with lamps, fittings and instructions

**Bathroom Lighting Regulations**

Zone 0 = Inside the bath or shower tray. Any light fitting installed in this area must be low voltage (12v max) and have an IP rating of at least IP67

Zone 1 = Directly above the bath or shower tray, up to a height of 2.25m from the floor. Light fittings installed in this area should be IP44 or higher. If the fitting is 240v a 30ma RCD must be used to protect the circuit.

Zone 2 = Over the bath or shower tray, but above zone 1. Zone2 also covers the area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from floor. This area around the wash basin is also zone 2 if within a 60cm radius of any tap. Lighting in this area should be at least IP44.